suppressor general

Replies

A

Anon09/07/26, 10:51No.65488894

nice getif i registered my own suppressor off of a modular 3d print, could i have multiple suppressors attached together as one piece to fasttrack the registration? basically just a really long modular device made of baffles that all thread onto each other off 1/2x28 threads, and could then be taken apart & put on multiple guns?

1

A

Anon09/07/26, 11:10No.65488917

>tfw state law includes "legally registered" as a requirement to use suppressors Still picked up a Velos that I shot for the first time yesterday Also bought some 77 gr to try because I forgot how dogshit the fuckton of TulAmmo I had on hand is after shooting terrible groups at 100 yards (and that it's probably best to avoid putting that shit through my nice new suppressor)

0

A

Anon09/07/26, 12:28No.65489027

No, I live in NC so we can't get them from 4473s. I already own a velos though. Might get the 762 version

1

A

Anon09/07/26, 18:19No.65489901

No, filling out a 4473 (for a metal tube, no less) is still complying and thus just as bad as tyranny itself.Celebrating tiny non-victories like gun owners have been doing recently is pathetic. Wake me up when the entire NFA is ripped up and the entire ATF is dismantled, when there is not a single "federally licensed" gun dealer left in the country, and when I can order select-fire belt fed rifles directly to my door from the manufacturer with cryptocurrency. This could happen overnight if "second amendment enthusiasts" weren't so easily pacified. >inb4 non-arguments made by golems and chat bots

1

A

Anon09/07/26, 19:47No.65490077

2

A

Anon09/09/26, 01:24No.65493555

Blessed thread.

0

A

Anon09/09/26, 13:25No.65494800

Kind of a weird thing.>have FN Five Seven with M10x1 threaded barrel >buy a dedicated GSL 5.7-22 suppressor >barrel manufacturer (EFK) advertises for use with GSL, so it should just work >M10x1 adapter on suppressor won't thread onto barrel >first thread bites, then gets insanely tight >fuck >double check product information on barrel and suppressor >yup, both are supposed to be M10x1 >double check suppressor and barrel to make sure I'm not retarded >yup, definitely feels way to tight >need to figure out which part is out of spec >go to local ACE the helpful place >use their nut/bolt size gauge >mfw both thread perfectlyIt would appear that GSL and EFK use opposite ends of the tolerance. With tolerance stacking, I'm now out of tolerance.

2

A

Anon09/09/26, 15:29No.65495124

I ordered 2 under the assumption that my local NFA dealer would be going along with the ruling. They called me later that day and told me they wouldn't and I couldn't get in touch with Silencer Shop for the last month to cancel my order so I was left stuck waiting a fucking month for them to approve the Form 3 and then ship to my dealer and NOW I'm still having to wait for the Form 4 to be approved. They sold a lot of suppressors by not being totally forthcoming about what dealers would be participating and now I'm left holding the fucking bag. I could have had these 2 cans a month ago if not for those faggots.

1

A

Anon09/09/26, 17:58No.65495533

Sick quints for sick suppressors.

0

A

Anon09/10/26, 01:08No.65496563

Form 4 approved in ONE day. Don't think I've ever had it this fast.

0

A

Anon09/10/26, 02:23No.65496706

Any recommendations on the new low back pressure titanium suppressors? Something not Huxwurx. A bunch of developments have come out over the last few months, I'd like to take advantage of the newer technology.

0

A

Anon09/10/26, 14:43No.65497678

No, PA doesn't allow suppressors or SBS unless they're in accordance with the NFA so only SBRs for now. I work at an FFL so I get deals on cans; I'm buying my first one, a Saker 556

2

A

Anon09/10/26, 22:07No.65498605

It's finally here.It's made from steel, it's heavy, not very quiet, high in back pressure, and just over $1k. A suppressor that I bought solely for aesthetics and not performance.

0

A

Anon09/11/26, 02:09No.65499041

I got two the same weekend of the ruling, and I plan on getting a third soon. Still deciding if it should be a .22 or a .45 can.

0

A

Anon09/11/26, 07:21No.65499610

Checked No, state is cucked with respect to the wording of their suppressor laws. Rip.

0