A
Anonymous09/14/25, 18:15No.2944888tractor general
post your tractors
211
Replies
A
Anon09/14/25, 20:34No.2944910
i have become fascinated with rooskie homebilt junk mini loaders and i want to create my own but have 0 need for one
and all the junk yards are gone so all there is for parts is fuckwits trying to sell previously submerged ford exploder rear ends for $400nooffersiknowwhatigot
and there is no market to sell the thing even near cost after the fun wore off in burgerland because theres plenty of used machines around and modern people here are scared of everything not shiny new plastic
A
Anon09/14/25, 22:06No.2944923
Protip: If you're looking to get into the tractor game, avoid anything with any DPF/DEF or any other type of exhaust control system that may or may not involve regen.They're a fucking nightmare. We had a Ford 4000 for decades with zero issues and only got rid of it because it didn't have a front end loader to 'upgrade' to a Kubota with a front end loader. The Kubota has spent more time in the shop than in the field. I don't think the Ford ever went to the shop except for painting.
A
Anon09/15/25, 00:27No.2944942
Quickly discovering I like using hydraulics, not fixing hydraulics. Anyone know how Gresen float valves come apart?
A
Anon09/15/25, 07:24No.2945014
I don't own a tractor, in fact I don't even own land. But if i did, I would have gotten a Fiatagri 180-90.
A
Anon09/16/25, 20:08No.2945217
A
Anon09/25/25, 19:55No.2947013
Hey, any idea what the trucks are underneasth all of the steel plating?
https://www.youtube.com/watch?v=Dxl67R4-j9c
https://www.youtube.com/watch?v=T1Utz0xI70o
A
Anon09/26/25, 12:12No.2947108
Early 90s JD. Yanmar engine in it will run for 100 years, I'm convinced. Just wish it had more power - I have an auger attachment but it gets stuck pretty easily and you have to be VERY careful when doing fence posts. Its strong enough to run my rototiller well though.
A
Anon09/26/25, 16:00No.2947138
Does anyone know how to remove this flange on a Bosch ep/rsv governor?
>Inb4 google it
Tried it, found sweet fuck all
>Inb4 let a professional do it
Nah
A
Anon09/28/25, 08:16No.2947476
Figure this is a good place to ask.
Client complains that cultivators slice the soil and leave a hardened soil line under the cultivated area which water runs through.Is that a feature of certain types of cultivator or are they just doing it wrong
A
Anon09/30/25, 00:57No.2947861
o kurwa
A
Anon10/11/25, 02:51No.2950126
Need a riding lawn mower, how about a decent tractor w a PTO and accessories?Looking at a used Massey Ferguson 245
A
Anon10/12/25, 11:36No.2950368
Blessed thread
A
Anon10/12/25, 19:52No.2950427
Here's mine, built 50 or some years ago in some tiny shop using what pieces of steel they had lying around
A
Anon10/13/25, 20:14No.2950631
O blyat
A
Anon10/14/25, 00:27No.2950701
>about to purchase 10 acres of land
>200 wide by 2000 deep
>First acre cleared with a house
>Rest of the land has moderate slopes and hills but filled with white cedars and several larger trees, about 1-2 feet in diameter
>Plan to clear another 1-2 acres of forest for animals and recreation
>Will need to shovel my sloping asphalt driveway of around 100 feetWhat do I need? Budget is around 20k if I absolutely need to spend it. Considering a Kubota bx series with a rear digger and a bucket, but $$$ can I get away with just using an ATV (doubt it, but asking).Most of the next year is going to be moving large logs and then dealing with snow and mowing going forward. Potentially have to dig my foundations for membrane but I can easily rent a small machine for that.Advice?
A
Anon10/21/25, 08:38No.2952143
this skid steer is back up for sale, should I buy it, fix a few things and then put it back up for sale, playing "pass the Yanmar"
A
Anon10/22/25, 01:04No.2952291
>loader cylinder leaking, again
I have torn down and resealed like 6 cylinders this year. at least I'm getting pretty good at it...
A
Anon10/26/25, 09:41No.2953280
I'm sure this has been asked before but did tractor styling keep up with cars or fall behind in the 80s.
pic related is 90s
A
Anon11/02/25, 14:11No.2954797
well it sure is boring around here (bump)
A
Anon11/14/25, 07:58No.2957506
The wet cold months are upon us, that means if you've not got animals it's time to spend it in the workshop overhauling gear for next year.
A
Anon11/22/25, 12:17No.2959469
A
Anon11/22/25, 15:20No.2959497
I find it funny that a lot of tractors ca move more than the average truck and not just amount of weight but also throughput.
Throughput would be calculated by mass times speed so a chamberlain c670 pulling 7 tonnes at 35km/hour average would have a throughput of 245tkm/hr which is the same as a falcon pulling a bit over 2.2 tonnes at 110km/hr.
A
Anon11/23/25, 00:01No.2959586
>county announces via newspaper auction for old john deere 4020 that hasn't been in service for ~15 years
>pictures of it are pretty rough
>starting price is $2100, $50 increments on bids
>dad hears about it from old timer he knows that still reads newspaper
>bids $2150, absolute minimum
>after final bid day, gets a call from county clerk that he won
>apparently NO ONE reads the fucking newspaper so no one knew/cared about it
>tires are flat, take our welder/generator and an air compressor out, one front and one rear tire air up
>we brought a 34' flatbed trailer and a LOT of chain to load it, county assists with one of their bucket loaders to help pull it up
>get it home, have hell unloading it but finally get it on the ground
>today decided to start working on it, first order is getting tires that will hold air so we can roll it around
>spend 2 fucking hours trying to get the unlevel bastard to stay on a jack, fell off twice
>finally get it up enough with a bottle jack to get a 10 ton house jack under it
>spend another two hours with a bead breaker, sledgehammer, and a few tire tools working the bastard off
>running out of daylight, call it a day
I'll take a few pics of it tomorrow, never crossed my mind to do it today.
A
Anon12/03/25, 07:54No.2961714
up
A
Anon12/13/25, 00:32No.2964274
The new gas station in town fucked me over today. Turns out they weren't adding enough antigel to their diesel. Ran for twenty minutes before crapping out, but luckily it broke down near an outlet. Two hours with a torpedo heater later I finally got it running. I've never had this problem before because while it was cold as fuck for the past week, that's normal around here and every gas station knows about this. All but the new one down the street.
A
Anon12/24/25, 14:16No.2966831
Today I just learnt Kubota made a 2.6L I6, what the fuck? It sounds like a tractor twice its size.
A
Anon12/24/25, 23:32No.2966908
I suppose all they had to do was make a new crank, cam and bock and they could use everything else from they twenty something horse power three cylinder.
A
Anon12/25/25, 23:52No.2967065
I wish I had a tractor. Only in FS do I get to fuck around in tractors.
A
Anon01/02/26, 03:50No.2968507
Gonna go check out a 1466 tomorrow. Don't have one of those in my fleet yet...
A
Anon01/03/26, 01:33No.2968687
Had this baby about 6 years now
A
Anon01/11/26, 00:40No.2970167
And I just added a John Deere 544b front end loader to the fleet. Gotta go pick it up next week. Started up without ether in the cold. Steering is tight. All the gears and brakes and hydraulics work as intended. Bucket needs a bit of work but fully functional as is... They were asking 15,500 and I offered 14,000.
A
Anon01/11/26, 01:20No.2970172
Slightly off topic but does anyone feel like you can work faster with the seatbelt on as you don't get bounced around as much? Well whenever you have rops you should be wearing one lest you get crushed by it.
A
Anon01/11/26, 18:58No.2970262
Mmm.
Tractor flavored milkshake.
A
Anon01/17/26, 04:10No.2971267
Annnnd I bought an International 1066 today...
A
Anon01/17/26, 23:31No.2971443
I have one of these in a container
Should I do it up?
Not mine obviously but the same model
A
Anon02/16/26, 02:07No.2976756
They also have this absolute beast for sale now... $2,250 is what they're asking. Says it is supposed to run but he hasn't heard it run, and apparently will not move forward or back, which who knows, could be something simple. Think I'll probably pass on this beast though, as I already have a pretty nice John Deere 410D extend-a-hoe.
A
Anon02/16/26, 16:44No.2976869
no self respecting operator would use a tractor
A
Anon02/17/26, 03:10No.2976969
My dad has a John Deere 410 from the 70’s. Lifter pump went out, replaced it, bled the lines at the fuel filter with the lifter pump handle. Can’t get it to crank now. Someone told me that instead of bleeding the actual fuel injection pump you can cap off the fuel filler port with a rubber gasket and blow compressed air in to prime fuel to the injectors. That didn’t work either. I’m gunshy with ether. Diesel should only need fuel and pressure to crank. Starting to question the battery and starter, I make about 5 attempts over 10 minutes before I run out of juice. Any suggestions before I call a professional?
A
Anon02/17/26, 03:11No.2976970
A
Anon02/19/26, 07:35No.2977401
Bought this model M for $800. Runs and drives but has a hairline crack in the headgasket that needs fixing this spring. I have no fucking use for this and don’t know why I bought it aside from it being cool and fun to drive around my humble few acres. Maybe will be worth something in a couple decades who knows
A
Anon03/20/26, 23:53No.2982201
Are Trident any good? Need a tractor for 18 acres of land to slash/grade/drill holes for fence/dig small stuff and this seems pretty decent for the price and implements. It's about 25k USD
A
Anon04/11/26, 22:23No.2985699
we ain't done yet
A
Anon04/30/26, 08:18No.2988487
NOT YET
A
Anon05/13/26, 15:29No.2990563
i like tractors
A
Anon05/21/26, 05:51No.2991915
dairy farmers
>were piss fucking broke here
also dairy farmers
>check out the new mower setup
A
Anon06/24/26, 21:02No.2997113
>how to smoke $40k in 2 seconds
A
Anon06/28/26, 19:59No.2997728
I'd rather be playing video games :\
A
Anon07/20/26, 06:10No.3000419
its the middle of summer farming and the tractor threads on pg 10
>the state of this place
A
Anon08/05/26, 00:44No.3002924
Outline of my work load
>5 acres total
>1.5 acres already grass I mow with my lawn tractor
>1.5 acres of forest, stacks of dead fallen trees and old logs in there. I'd like to clean things up and fell a few dangerous ones
>2 acres of overgrown bush, approx 20 years, old stumps and uneven terrain all over
>want to add swales and berms to this area as it terminates in a river, want to slow water down and add a fruit and native plant orchard
>Canada - lots of snow I'd eventually like to get a blowerMy budget is 20k CAD. Thinking a bucket and backhoe combo would be nice. I've been looking at Kubota b7500s, Kubota b2301 (over budget) and John Deere 4100 and 2210 were suggested.Any advice? Should I avoid hydrostatic if I don't mind manual? I want reliability. Should I just rent, it's fairly pricey in my neck of the woods, around $1000 per weekend plus a trailer.
A
Anon08/05/26, 00:50No.3002926
Also posting my "tractor" because why not. Has a fabricated deck and does a good job. Going to convert it to mulcher blades one of these days
A
Anon08/07/26, 10:22No.3003314
Not my tractor, but I wish it were
A
Anon08/09/26, 07:16No.3003611
https://www.youtube.com/watch?v=aPsLEgjZves
A
Anon08/09/26, 08:01No.3003615
never seen a pto catcher before. Now i wonder how often these get twisted off
A
Anon08/10/26, 05:06No.3003745
Probably be buying another 966 international tomorrow... I just can't fucking pass up these damn tractors they keep dragging in. He's asking $2500. I went there today and checked all the fluids and hooked some jumper cables to it and it was running in half a crank. Steering and brakes work. It moves forwards and backwards...
A
Anon08/24/26, 07:29No.3005597
www.youtube.com/@Steven-yw4bm
vintage aryan tractor ad vids are pretty kino
especially the ones with granpa hanss hussy granddaughter marianne
A
Anon09/04/26, 19:57No.3006973
does anyone here operate an FJuden dynamics system? this thing is giving me headaches
